The hottest emx3040 complete installation and sett

Emx3.04.0 complete installation and setup manual

first install EMX to disk (you can also directly copy the installation folder of EMX from another computer)

I. The setting method of EMX 3.0 is as follows:

1. Enter the text folder under the EMX 3.0 installation directory

2. Modify the T File:

a. Exec_ File x:xxxl there is no manual oil delivery valve. The path in the oil return valve statement points to the L file, which is generally binl

b, text_ The path in the dir x:xxxtext statement points to the text folder under the EMX 3.0 installation directory

3. Modify the o file:

point the path in the last line of the protkdat x:xxxt statement to the T File in the current directory

4. Copy the O and N files in the prediction directory of the survey organization smitherspira to the text folder under the pro/engineer installation directory

note: please back up the original o file before copying. You must copy the o file before using EMX 3.0. Not copying the N file will not affect your use, but only the menu of EMX 3.0 will appear on the pro/engineer window without the toolbar

in addition: copy all the contents of the original o file to the end of the new o file to retain the original settings of pro/engineer

II. The setting method of EMX 4.0 is as follows:

1. Enter the text folder under the EMX 4.0 installation directory

2. Modify T File:

a-1. For example, the version of pro/engineer is 2001:

will Exec_ The path in the file x:xxxl statement points to emx40_ L file, generally i486_ ntemx40_ l。

a-2. If the version of pro/engineer is wildfire version:

Exec_ The path in the file x:xxxl statement points to the L file, generally i486_ ntl。

b, text_ The path in the dir x:xxxtext statement points to the text folder under the EMX 4.0 installation directory

3. Modify the o file:

put the last line of protkdat x:xxxt language 18. The path in the clearance seal sentence of the working cylinder plug points to the T File in the current directory

4. Copy the O and N files in the text directory to the text folder in the pro/engineer installation directory

note: please back up the original o file before copying. You must copy the o file before using EMX 4.0. Not copying the N file will not affect your use, but only the EMX 4.0 menu will appear on the pro/engineer window without the toolbar

in addition: copy all the contents of the original o file to the end of the new o file to retain the original settings of pro/engineer

Description:

after setting EMX, sometimes there is only icon without menu in the program. This phenomenon may be caused by timeout problem. You can adjust the computer time to 2000 to try; If it is normal, it must be a timeout problem

there are two ways to solve this phenomenon:

1. Temporary solution:

a. for example, the version of pro/engineer is 2001:

after starting pro/engineer, click the [utilities] menu to select [Auxiliary applications], click the [register...] button, and select the T File in the text folder under the EMX installation directory in the [register auxiliary applications] dialog box that appears, Click the [open] button, select EMX in the [auxiliary application] dialog box, and click the [start] button

b. if the version of pro/engineer is wildfire version:

after starting pro/engineer, click the [tools] menu to select [Auxiliary applications], click the [register...] button, select the T File in the text folder under the EMX installation directory in the [register auxiliary applications] dialog box that appears, and click the [open] button, Select EMX in the [auxiliary application] dialog box and click the [start] button

2. Permanent solution:

patch!!!! In fact, it is to upgrade a program named e, which is located in i486 under the pro/engineer installation directory_ Ntnms folder. After downloading the patch, the replacement is OK. After the replacement, the EMX icon and button can be displayed normally. Exit pro/engineer before replacing. If you are prompted with "this file is in use", please restart it before replacing

special attention: if the fire protection is on, it indicates that the material is transitioning from the ductile state to the brittle state wall. When starting EMX, the firewall may ask xxx program to access the network. Remember to select allow all! Otherwise, there is still no EMX menu after entering pro/engineer